The Qidi Tech X-One comes with an all metal chassis. This gives you some stability that cannot be found in many other desktop 3D printers. While this does give it some weight (it’s over 40 pounds), it also means it’s not likely to move around. Heck, its possible it won’t even shift when getting a slight bump.
The bed is easy to level and can be leveled in about a minute. It will stay leveled for a number of print jobs so not something that is going to take away from your productivity.
It uses the standard 1.75mm filament and prints well in ABS and PLA.
The X-One is flexible and comes with the ability to connect to it and print via USB or SDCard. You can use Cura, Simplify 3D and QIDI Print for your 3D models. Thus you can use a Windows or Mac OSX computer to run your program.
Another item is the built in touchscreen on the Qidi Tech X-One, a nice little feature.
The ability to control the temperature of the pen is one of it’s strong points. By allowing you to control the temperature anywhere between 130-240 degrees Celsius that means you can use a wide range of materials in the pen.
MYNT3D Professional Printing Pen also comes with a replaceable hot end. What that means is that within a couple of minutes you can change to a new nozzle. This will prolong the use and ability of this 3D printing pen many times longer than other pens.
You know how important speed is when you are creating. Because the MYNT3D has a step-less speed control, it allows you to dial in just the right amount of material you need for the task at hand. If you are needing to fill a large area, crank up the output… then dial it back for more fine tuned printing.
You are able to have total control over the speed of the output. Thus your designs come to life easier than ever.
The 3DWOX is an all-in-one 3D printer is reminds you of a traditional 2D desktop printer. It’s enclosed nature allow you to have less noise and a safer operation environment. Coming from Sindoh who have made 2d printers for many years, you can tell they were very interested in getting the thoughtful and accessible side of the 3D printer right. I think they have succeeded.
To load the filament just insert the cartridge. Since it’s that easy, you will have time for more drinks! Like I said before, it makes you feel like you are just replacing the toner in your 2D printer. Thus all the headache normally attached to threading filament through tiny feed mechanisms is gone!
As you know, a level printing bed is key to have a successful 3D print. The 3DWOX has fully assisted leveling support to allow you to ensure that your bed is flat and that it stays that way.
One of the things I love about the Sindoh DP200 3DWOX 3D printer is its connectivity. Again hearkening back to 2D cousins… it has everything, WiFi, USB cable, Ethernet and USB flash drive.
Finally this means you have have the printer anywhere in the house and still connect to it. Especially relevant, it has a camera and LED lighting built in. Thus you can monitor the print job via your laptop or smartphone! Amazing!
The very interesting thing about the Monoprice Select Mini is that even with its small footprint it still allows you to use almost all 1.75mm filament types. Thus you can build one model in PLA, the next in ABS then another in a metal composite. Don’t forget you could also use wood composite or dis-solvable PVA as well.
The Select Mini 3D printer from Monoprice is compatible with a number of software packages common to 3D printing. Cura, Repetier and others can be used to power your designs. Connect to Windows or Mac OSX and use MicroSD or a MicroUSB connection.
Now this is really cool… the Monoprice Select Mini 3D Printer comes ready to print right out of the box! Yep, take it out of the box, put it on your desk, plug it in, and you can be printing right away using the 3D models that are included on the SD card that comes with the printer. You cannot beat that for setup time!
This is all possible because they calibrate the printer at the factory before it’s boxed up. So when you get it, it’s all ready to run.